Who makes OmniFilter?

Click to see full answer.

Similarly, you may ask, how do I change my OmniFilter?

Unscrew the bottom portion of the water filtration system with the blue tank wrench that came with your OmniFilter water filtration system. Turn the tank wrench clockwise. Pour any water currently located in the tank you just unscrewed out into your bucket or large pan. Discard the old water filter cartridge.

Likewise, how do you change a whole house filter? Steps to Changing Your Whole House Filter

1. Turn Water Off. Turn water off at both the inlet side of pre-filter and outlet side.
2. Relieve Pressure.
3. Unscrew Housing.
4. Remove Filter.
5. Clean Inside of Filter Housing.
6. Replace Filter.
7. Screw Housing Back On.
8. Turn Water On.

Also question is, how do I change my Omnipure filter?

How To Change An Omnipure Water Filter

1. Be sure to shut off the water supply line that leads to the Omnipure system.
2. Shut off the ball valve for the tank.
3. Also, shut off the ball valve for the line leading to either an ice maker or refrigerator.
4. Locate the reverse osmosis faucet and release the pressure by opening the faucet.

How do you change a sink water filter?

Steps

1. Close the shut-off valve that controls the flow to the system.
2. Open the faucet where the filtered water comes out to relief the pressure.
3. Loosen filter housings either by hand or with a housing wrench.
4. Remove all housings and cartridges.
5. Notice the O-rings in the filter housings.