Where does the water line go on a refrigerator?

In most cases, the water line can be run from a kitchen faucet water supply line through the kitchen cabinets and over to the refrigerator. If running the line through the cabinets is not feasible, you might need to run a line through the floor and up to where the refrigerator is located.


Accordingly, how do you hook up a water line to a refrigerator?

Attach one end of the copper tubing to the refrigerator’s water pipe, using a nut and ferrule. Important: Make sure you leave extra tubing coiled behind the refrigerator, so you can move the refrigerator when necessary. Cut the cold water line under the sink or in the basement and attach a copper T-fitting.

One may also ask, how do I connect the water line to my LG refrigerator? Follow the information below to properly connect the water line to the refrigerator.

Connecting to refrigerator

  1. Unplug the refrigerator or disconnect power.
  2. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.
  3. Turn water supply valve ON.
  4. Plug in the refrigerator or reconnect power.

Correspondingly, what size is the water line to a refrigerator?

Tubing Sizes Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch. Check your refrigerator’s owner’s manual or the manufacturer’s website for the recommended size and type of water line for your unit.

Where does fridge get water?

Overview. Water tank is located at the back of lower drawer of fridge compartment which means cold water temperature must be same as fridge compartment. When you press water lever water comes from water tank through water line at the bottom of fridge.

Leave a Comment