Besides, can I use 2.5 mm cable for lighting?
You can use 2.5 mm² cable of course. In large buildings sometimes 4 or 6 mm² cable is used on the feeder runs, and near the light fittings the cables are branched off in J-boxes to 1.5 mm² to go to the light fittings, to compensate for voltage drop. These light circuits are often controlled through contactors.
One may also ask, can you use 3 core cable for lighting? 3 Core cables Domestic light fittings that are controlled by two switches (two way lighting) use 3 core and earth for connections between the two switches. The cable is made up of 3 solid cores, which are individually insulated and wrapped in an outer PVC sleeving.
In this way, what type of cable should I use for outside lighting?
Mains-powered garden lighting Once outdoors, you should supply your lights via 1.5mm² three core steel-wire-armoured cable (SWA). Make sure that you only fit weatherproof lights that are suitable for outdoor use and that your circuit is RCD-protected.
What is 2.5 mm cable used for?
2.5mm Twin and Earth is commonly used as indoor domestic cable. The most common use for this type of cable is for circuits that provide power to sockets. It is made up of two cores and an earth core which must be covered with the identifying green and yellow sleeve when installed.