Changing your IP address in Windows PC is a straightforward procedure, but it can also be performed on other operating systems, such as Mac and iPhone. This is an important task to perform if you are concerned about security. To open the Command Prompt, press the Windows key, then type “cmd” into the search bar. Select the network adapter from the list, which is named as “local area connection”, “local area connection 2” or “wireless network connection.”
To change your IP address in Windows, use the command-line environment or PowerShell. To access the netsh interface, type ip show config, and note down the name of your network adapter. If your network adapter is named Wi-Fi, it is the Wi-Fi adapter. Alternatively, you can type ipconfig and hit enter. To change the IP address of the local network, you will need to enter the name of the device you are trying to configure.
To change your IP address, you can enter the command netsh. This command will show you the information about your network adapter. It will tell you whether your computer is a static or dynamic one. A dynamic IP address changes each time your device connects to the network, so you’ll need to change it every time you use the same network. You’ll need a different IP address for every network adapter.